Thermal Management Tool

Select Options Below

Product Category

Cooling Capacity Units

Cooling Capacity Range

Cooling Type

Mounting Range

Thermal Management Selection Tool

Need help to determine your data center cooling requirements? The Thermal Management Selection Tool helps you select the best cooling equipment for a broad range of applications including small or large data rooms, high-density data rooms, shelter cooling, server racks, and enterprise data centers. Just answer a few questions in the form on the side to use the Thermal Management Selection Tool.

Thermal Management Selection Tool
Common Framework 1400 Series Cable Caps

1400 Series Cable Caps

These neoprene or TPR caps seal off open cable ends. Caps with air valves retain a nominal air pressure of five to fifteen pounds. The adjustable stainless steel band clamps ​enable caps to be used effectively on cable .250 inches (6.35mm) to .500 inches (12.70mm) smaller than the cap’s inside diameter. All caps are 4.0 […]
Common Framework CB0028

CB0028

Air-Cooled, freecooling and adiabatic freecooling chillers designed for the efficient cooling of small data centers
Common Framework CG0023

CG0023

170-400 kW Air-cooled chillers designed for the efficient cooling of small data centers
Common Framework CR019RA, Air-Cooled, 300mm, 19kW

CR019RA, Air-Cooled, 300mm, 19kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR019RW, Water/Glycol Cooled, 19kW

CR019RW, Water/Glycol Cooled, 19kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR020RA, Air-Cooled, 20kW

CR020RA, Air-Cooled, 20kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR032RC, Chilled Water, 32kW

CR032RC, Chilled Water, 32kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR035RA, Air-Cooled, 35kW

CR035RA, Air-Cooled, 35kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR035RW, Water/Glycol Cooled, 35kW

CR035RW, Water/Glycol Cooled, 35kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]
Common Framework CR040RC, Chilled Water, 40kW

CR040RC, Chilled Water, 40kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and provides efficient cooling close to the heat load for applications that require higher cooling density. With adjustable airflow baffles and Optimized Aisle Controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver […]

CRD100, Air-Cooled, 300mm, 10kW, 208-230V/1PH/60Hz

The Liebert® CRV 10kW is the next-generation in row based server rack cooling designed for edge applications and small spaces. Delivering up to 10kW of scalable in row cooling capacity in a minimal footprint, it offers all the features of a standard precision air conditioner in a smaller size. Its inverter-driven compressor and EC fans […]
Common Framework CRD101, Air-Cooled, 300mm, 10kW, 208-230V/3PH/60Hz

CRD101, Air-Cooled, 300mm, 10kW, 208-230V/3PH/60Hz

The Liebert® CRV 10kW is the next-generation in row based server rack cooling designed for edge applications and small spaces. Delivering up to 10kW of scalable in row cooling capacity in a minimal footprint, it offers all the features of a standard precision air conditioner in a smaller size. Its inverter-driven compressor and EC fans […]
Common Framework CW038, 38kW

CW038, 38kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW041, 41kW

CW041, 41kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW051, 51kW

CW051, 51kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW060, 60kW

CW060, 60kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW076, 76kW

CW076, 76kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW084, 84kW

CW084, 84kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW114, 114kW

CW114, 114kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW146, 146kW

CW146, 146kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW181, 181kW

CW181, 181kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW300, 300kW

CW300, 300kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW340, 340 kW

CW340, 340 kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW400, 400kW

CW400, 400kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework CW440,  440kW

CW440, 440kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework DA050, 50kW

DA050, 50kW

The Liebert® DSE is the industry’s first pumped refrigerant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Common Framework DA080, 80kW

DA080, 80kW

The Liebert® DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Common Framework DA085, 85kW

DA085, 85kW

The Liebert® DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Common Framework DA125, 125kW

DA125, 125kW

The Liebert® DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Common Framework DA150, 150kW

DA150, 150kW

The Liebert® DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Common Framework DA165, 165kW

DA165, 165kW

The Liebert® DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.

DA250, 250 kW

The Liebert® DSE DA250, 250 kW provides new levels of performance for colocation and cloud hosting facilities, with rapid deployment, low cost of ownership, high energy efficiency and low peak power. The system is ideal for raised or non-raised floor data centers. Its pumped refrigerant economizer uses no water and requires no outside air into […]
Common Framework DME020E, 20kW

DME020E, 20kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Common Framework DME027E, 6.65kW

DME027E, 6.65kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Common Framework DME037E, 8.9kW

DME037E, 8.9kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Common Framework FQ4039
Common Framework Liebert Challenger 3000 Perimeter Cooling System
Common Framework Liebert Chilled Water Air Handler

Liebert Chilled Water Air Handler

The Liebert Chilled Water Air Handler provides high efficiency with elevated water loop temperatures and waterside or airside economizers.
Common Framework Liebert CSU 3000

Liebert CSU 3000

This product is discontinued.
Common Framework Liebert Custom Air Handling Systems

Liebert Custom Air Handling Systems

Liebert free cooling evaporative cooling systems transform data center design and meet the efficiency and availability needs of the largest, most complex data center environments. Comprehensive configuration and project management services ensure that our solutions fit each customer’s specific requirements.

Liebert Datacool

This product is discontinued.
Common Framework Liebert DataMate Mission Critical Cooling System, 5-10.5kW

Liebert DataMate Mission Critical Cooling System, 5-10.5kW

Liebert DataMate is a small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floor-mount or wall-mount installation, and requires little or no floor space.
Common Framework Liebert Deluxe System 3 Precision Cooling Systems, 21-105kW
Common Framework Liebert Direct Evaporative Freecooling Unit, 150-600+kW

Liebert Direct Evaporative Freecooling Unit, 150-600+kW

The Liebert Direct Evaporative Freecooling Unit delivers the lowest capital and operating costs, with a mechanical PUE of less than 1.1, streamlined installation and the industry’s lowest peak power consumption. Options are available for supplemental DX (direct expansion) or chilled water cooling sized for full or trim cooling.
Common Framework Liebert DMC Indoor Condenser, 5-18kW

Liebert DMC Indoor Condenser, 5-18kW

The Liebert DMC is an indoor, water/glycol condenser designed for the Liebert Datamate cooling system.
Common Framework Liebert DS Direct Expansion Cooling System

Liebert DS Direct Expansion Cooling System

As the world’s most flexible and reliable direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS028A, 28kW
Common Framework Liebert DS, DS035A, 35kW

Liebert DS, DS035A, 35kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS042A, 42kW

Liebert DS, DS042A, 42kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS053A, 53kW

Liebert DS, DS053A, 53kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS070A, 70kW

Liebert DS, DS070A, 70kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS077A, 77kW

Liebert DS, DS077A, 77kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Common Framework Liebert DS, DS105A, 105kW

Liebert DS, DS105A, 105kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.

Liebert DSE DA080 Filter Parts

Filter parts options for the Liebert DSE DA080.
Common Framework Liebert DSE Packaged Free-Cooling Solution, 400-500kW Draw-Thru Rooftop Configuration

Liebert DSE Packaged Free-Cooling Solution, 400-500kW Draw-Thru Rooftop Configuration

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Common Framework Liebert DSE Packaged Free-Cooling Solution, 60kW

Liebert DSE Packaged Free-Cooling Solution, 60kW

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Common Framework Liebert DSE Packaged Freecooling System, 60kW, Perimeter

Liebert DSE Packaged Freecooling System, 60kW, Perimeter

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Common Framework Liebert DX Air Handler, 150-600+kW

Liebert DX Air Handler, 150-600+kW

The Liebert DX Air Handler delivers data center efficiency with the flexibility for modular build outs. Multiple configurations include outside air economization, evaporative condensing and evaporative cooling to reduce energy consumption.
Common Framework Liebert EC Fan Upgrade Service

Liebert EC Fan Upgrade Service

Improve energy efficiency and overall system reliability in your data center by utilizing the newest technology for your thermal infrastructure. Electrically commutated (EC) fans offer innovative technology with exceptional value. When integrated with continuous speed control across the full operating range of thermal management units, EC fans provide a simple, cost-effective way to introduce energy-efficient […]
Common Framework Liebert EconoPhase Pumped Refrigerant Economizer

Liebert EconoPhase Pumped Refrigerant Economizer

The Liebert Econophase pumped refrigerant economizer works with the Liebert DSE cooling unit and Liebert MC Outdoor Condenser to significantly improve data center efficiency – without bringing in outside air and without using water.
Common Framework Liebert EFC Indirect Evaporative Freecooling System, 400kW

Liebert EFC Indirect Evaporative Freecooling System, 400kW

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger and advanced Liebert iCOM controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC achieves mechanical PUE levels as […]
Common Framework Liebert EFC Indirect Evaporative Freecooling System, 400kW, Perimeter

Liebert EFC Indirect Evaporative Freecooling System, 400kW, Perimeter

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger with advanced controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC provides low peak power usage, a rapidly […]
Common Framework Liebert EFC Indirect Evaporative Freecooling System, 400kW, Rooftop

Liebert EFC Indirect Evaporative Freecooling System, 400kW, Rooftop

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger with advanced controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC provides low peak power usage, a rapidly […]
Common Framework Liebert Fin/Tube Outdoor Condenser, 17.5-210kW

Liebert Fin/Tube Outdoor Condenser, 17.5-210kW

These easy-to-Install and service air-cooled condensers for outdoor heat rejection are precisely matched to the requirements of Liebert data center cooling and fluid chiller systems.
Common Framework Liebert iCOM Control Upgrade Service

Liebert iCOM Control Upgrade Service

In a typical data center, cooling accounts for 38 percent of total energy consumption. Improvements to your cooling system are an opportunity for significant cost savings. Liebert iCOM control upgrade service enables more efficient variable capacity control. The intelligent control capabilities immediately enable energy and cost savings.
Common Framework Liebert Indirect Evaporative Free Cooling Unit, 150-400+kW

Liebert Indirect Evaporative Free Cooling Unit, 150-400+kW

The Liebert Indirect Evaporative Free Cooling Unit improves energy efficiency with potential PUEs under 1.2 with minimal water usage. It includes supplemental DX (direct expansion) or chilled water options for trim cooling requirements.
Common Framework Liebert MC Microchannel Outdoor Condenser,  28 – 220kW

Liebert MC Microchannel Outdoor Condenser, 28 – 220kW

The Liebert MC Microchannel Condenser is an outdoor air-cooled condenser that provides higher efficiency, while using less refrigerant. Features such as variable speed fans, advanced controls and a microchannel coil make this system uniquely innovative.
Common Framework Liebert MCD, Indoor Condenser Unit, 7-28kW

Liebert MCD, Indoor Condenser Unit, 7-28kW

The Liebert MCD is an indoor, air-cooled condenser that works with the Liebert Mini-Mate2 and Liebert DataMate.
Common Framework Liebert Mini-Mate, Ceiling-Mounted Precision Cooling System, 3.5-28kW

Liebert Mini-Mate, Ceiling-Mounted Precision Cooling System, 3.5-28kW

The Liebert Mini-Mate is a zero footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework Liebert Outdoor Drycooler, 7-525kW

Liebert Outdoor Drycooler, 7-525kW

Liebert outdoor drycoolers provide free-cooling and reliable heat rejection, using pumped glycol heat-transfer fluid.
Common Framework Liebert PCW Compact Chilled Water Cooling System., 11-29kW

Liebert PCW Compact Chilled Water Cooling System., 11-29kW

Liebert PCW chilled water data center cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small space air conditioning.
Common Framework Liebert PDX Compact DX Cooling System, 11-29kW

Liebert PDX Compact DX Cooling System, 11-29kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Common Framework Liebert PFH Outdoor Condenser, 3.5-28kW

Liebert PFH Outdoor Condenser, 3.5-28kW

The Liebert PFH is an outdoor air-cooled condenser designed for the Liebert Mini-Mate2 and Liebert DataMate.
Common Framework Liebert Piggyback Indoor Condenser, 16-98.4kW

Liebert Piggyback Indoor Condenser, 16-98.4kW

Liebert Piggyback air-cooled condensers support indoor applications where outdoor heat rejection is not practical, such as high-rise buildings or areas with restricted access.
Common Framework Liebert Piggyback Indoor Drycooler, 32-97kW

Liebert Piggyback Indoor Drycooler, 32-97kW

These indoor drycoolers provide solutions for applications where outdoor heat rejection locations are not practical, such as high-rise buildings or areas with restricted access.
Common Framework Liebert XD Piping System for Liebert XD Units

Liebert XD Piping System for Liebert XD Units

This prefabricated, pumped-refrigerant distribution piping can be installed in anticipation of cooling system expansion to support the rapid scalability of Liebert XD cooling modules. These modules can then be quickly added, disconnected, or repositioned as required and made operational with flexible connection piping and quick-connect fittings.
Common Framework Liebert XD Pumping and Chiller Units, 130-160kW

Liebert XD Pumping and Chiller Units, 130-160kW

The indoor Liebert XD Pumping and Chiller Units include the Liebert XDP and the Liebert XDC units. These refrigerant-based systems support Liebert XD System spot/zone data center cooling modules, including the Liebert XDO, Liebert XDV, Liebert XDH, and Liebert XD CoolFrame units. The Liebert XDP is used between the cooling units and an associated heat […]
Common Framework Liebert XD Refrigerant-Based Cooling Modules

Liebert XD Refrigerant-Based Cooling Modules

Liebert XD refrigerant-based cooling modules deliver high-density cooling with highly flexible configurations for floor-mount, rack-mount and ceiling-mount applications.
Common Framework Liebert XDA, Air Flow Enhancer, 1000CFM

Liebert XDA, Air Flow Enhancer, 1000CFM

The Liebert XDA rack fan unit optimizes data center cooling by increasing air flow through densely populated enclosures, past congested cabling; removing hot spots within the enclosure that can threaten the uptime of your critical systems.
Common Framework Liebert XDC, XD Chiller and Pumping Unit, 160kW

Liebert XDC, XD Chiller and Pumping Unit, 160kW

Coolant chiller unit available in an air cooled configuration with remote condenser. In conjunction with the Liebert XD Cooling Modules, the Liebert XDC system can cool more than 30kW per rack.
Common Framework Liebert XDH, 22-30kW​​

Liebert XDH, 22-30kW​​

In-the-row cooling module placed directly in line with the rack enclosures, and requires very little floorspace. Air from the hot aisle is drawn in through the rear of the unit, cooled, and then discharged horizontally through the front of the unit into the cold aisle.
Common Framework Liebert XDO, XD Overhead Cooling Module, 17.2-20kW

Liebert XDO, XD Overhead Cooling Module, 17.2-20kW

Overhead cooling module that mounts directly above the cold aisle, requiring no floorspace. It draws in hot air from the hot aisle, then discharges cool air into the cold aisle where the equipment air inlets are located.
Common Framework Liebert XDP Pumping Unit, 130-160kW

Liebert XDP Pumping Unit, 130-160kW

Liebert XDP is a system-matched pumping unit, designed to support to Liebert XDO, Liebert XDV, Liebert XDH, and Liebert XD CoolFrame spot/zone cooling units. It is the isolating interface between the building chilled water system and the pumped refrigerant circuit. In conjunction with the Liebert XD Cooling Modules, the Liebert XDP system can cool more […]
Common Framework Liebert XDP-W, XD Water-Based Pumping Unit

Liebert XDP-W, XD Water-Based Pumping Unit

Houses the isolating heat exchanger between the Liebert DCD or Liebert XDK-W and the building chilled water. It circulates the chilled water to the cooling modules at a temperature always above the actual dew point to prevent condensation.
Common Framework Liebert XDV, XD Racktop Cooling Module, 8.8-10kW

Liebert XDV, XD Racktop Cooling Module, 8.8-10kW

Rack cooling module that mounts vertically on or above the IT rack enclosure, requiring no floorspace. It draws hot air from inside the cabinet or from the hot aisle. It then cools the air and discharges it down to the cold aisle.

Liebert® Cooling System Retrofits and Upgrades

Achieve 30% annual return on investment and improve data center efficiency and protection. From cooling unit retrofit parts to turnkey installed upgrade services, we can help you calculate ROI, configure the right solution, obtain energy rebeates, manage installations and continually optimze your cooling systems.
Common Framework Liebert® CRV In Row Cooling System, 10-40kW

Liebert® CRV In Row Cooling System, 10-40kW

The Vertiv™ Liebert® CRV is a precision data center cooling solution, integrated within a row of data center racks and was designed to address some of the major challenges seen in high density applications. With adjustable airflow baffles and controls that independently manage airflow and temperature, the Liebert CRV can precisely deliver highly efficient cooling […]
Common Framework Liebert® CW Chilled Water Cooling System 038-181kW

Liebert® CW Chilled Water Cooling System 038-181kW

The innovative Liebert® CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Common Framework Liebert® DCD Water Based Cooling Modules up to 50 kW with Liebert® DCP 200 kW Pumping Unit

Liebert® DCD Water Based Cooling Modules up to 50 kW with Liebert® DCP 200 kW Pumping Unit

The Liebert® DCW chilled water-based cooling family was designed specifically for high heat density applications where the challenges of reducing energy consumption and increasing processing capabilities are the top priority for data center managers. By delivering cooling directly at the source, the DCD Rear Door Heat Exchanger provides a room-neutral environment, while the DCP Coolant […]
Common Framework Liebert® DCD Water-Cooled Active Rack Door, 35kW

Liebert® DCD Water-Cooled Active Rack Door, 35kW

The Liebert® DCD active chilled-water cooling unit is a highly efficient heat exchanger module that mounts on the rear of an IT rack and provides up to 35kW of room-neutral cooling. The active fan module mounts on the DCD passive door and aids the server fans in properly removing the heat load from the high-density […]
Common Framework Liebert® DCD Water-Cooled Active Rack Door, 50kW

Liebert® DCD Water-Cooled Active Rack Door, 50kW

The Liebert® DCD active chilled-water cooling unit is a highly efficient heat exchanger module that mounts on the rear of an IT rack and provides up to 50kW of room-neutral cooling. The active fan module mounts on the DCD passive door and aids the server fans in properly removing the heat load from the high-density […]
Common Framework Liebert® DCD Water-Cooled Passive Rack Door, 35 kW

Liebert® DCD Water-Cooled Passive Rack Door, 35 kW

The Liebert® DCD chilled-water cooling unit is a highly efficient heat exchanger module that mounts on the rear of an IT rack and provides up to 35kW of room-neutral cooling. By utilizing the IT equipment fans inside the rack, the DCD passive door requires zero energy, maximizing the efficiency of your high-density system. The DCD […]
Common Framework Liebert® DCD Water-Cooled Passive Rack Door, 50kW

Liebert® DCD Water-Cooled Passive Rack Door, 50kW

The Liebert® DCD chilled-water cooling unit is a highly efficient heat exchanger module that mounts on the rear of an IT rack and provides up to 50kW of room-neutral cooling. By utilizing the IT equipment fans inside the rack, the DCD passive door requires zero energy, maximizing the efficiency of your high-density system. The DCD […]
Common Framework Liebert® DCP Water-Based Pumping Unit, 200kW

Liebert® DCP Water-Based Pumping Unit, 200kW

The Liebert® DCP coolant pumping unit was specifically designed to support the Liebert® DCD rear door by isolating the pumped water going to the rear doors from the building chilled water system. With advanced controls and energy efficient pumps, the DCP maintains the temperature and flow rate of the water at a level that eliminates […]
Common Framework Liebert® DSE Free-Cooling Economization System, 50-265 kW

Liebert® DSE Free-Cooling Economization System, 50-265 kW

Reduce costs and increase economization hours with the highly efficient Liebert® DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 8,500 installations.
Common Framework Liebert® DSE Packaged Free-Cooling Solution, 400-500kW

Liebert® DSE Packaged Free-Cooling Solution, 400-500kW

Reduce costs and increase economization hours with the highly efficient Liebert® DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 8,500 installations.
Common Framework Liebert® iCOM™ Cooling Unit Control

Liebert® iCOM™ Cooling Unit Control

Manage and control data center cooling units to improve protection, automate cooling system routines and simplify maintenance.
Common Framework Liebert® iCOM™-S

Liebert® iCOM™-S

Manage and control your entire data center cooling system for up to 40% higher efficiency, improved protection and greater productivity. Liebert® iCOM™-S provides a single point for managing your entire cooling infrastructure and gaining quick access to actionable data, system diagnostics and trending.
Common Framework Liebert® vNSA Network Switch for Liebert® iCOM™ Controls

Liebert® vNSA Network Switch for Liebert® iCOM™ Controls

Connects multiple cooling units equipped with Liebert® iCOM™ unit controls, allowing them to communicate and function as a team, and also supports lead/lag operation.
Common Framework Liebert® XDU Coolant Distribution Units

Liebert® XDU Coolant Distribution Units

Designed to support liquid cooling within high density environments, the Liebert® XDU Coolant Distribution Units are suitable for chip & rear door cooling applications that offer easy, cost-effective deployment in any data center. The Liebert XDU family offers systems that operate with/without facility water, allowing you to tap into the benefits of liquid-cooled servers to […]
Common Framework MCR – Mini Computer Room Enclosure

MCR – Mini Computer Room Enclosure

Vertiv rack enclosure protection solutions bring together the full range of Vertiv support systems into a single package. Depending on the level of protection required, these self contained systems can include comprehensive, computer-grade support features such as cooling, power, monitoring and security — all integrated in a seamless, qualified design.
Common Framework MMD12E, 3.55kW

MMD12E, 3.55kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD18E, 4.85kW

MMD18E, 4.85kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD23C, 3.80kW

MMD23C, 3.80kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD24E, 5.7kW
Common Framework MMD36E, 8.3kW

MMD36E, 8.3kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD40C, 7.60kW

MMD40C, 7.60kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD60E, 16.4kW

MMD60E, 16.4kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD8TC, 22.5kW

MMD8TC, 22.5kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Common Framework MMD96E, 24.9kW

MMD96E, 24.9kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.

NetSpan ProForm Series, Broadband Edge Enclosure

The ProFORM FTTP vault series of pedestals mounts to the top of a pre-cast vault.
Common Framework NetXtend SCM Series

NetXtend SCM Series

​Stand-alone or separate side-loading power/equipment andbattery enclosures are designed for small cell sites at the network edge.
Common Framework New Liebert Mini-Mate, Ceiling-Mounted Variable Capacity Cooling, 10.5, 14 & 17.5kW

New Liebert Mini-Mate, Ceiling-Mounted Variable Capacity Cooling, 10.5, 14 & 17.5kW

The New Liebert Mini-Mate 3, 4 and 5-ton (10.5, 14 & 17.5kW) variable capacity system is an efficient and reliable ceiling-mounted precision cooling system for edge computing and other small IT spaces. It saves customers money and increases IT protection through a high-efficiency variable capacity design, fast installation, lower maintenance requirements and built-in remote monitoring […]
Common Framework PW011, 11kW

PW011, 11kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Common Framework PW017, 17kW

PW017, 17kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Common Framework PW029, 29kW

PW029, 29kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Common Framework PX011, 11kW

PX011, 11kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Common Framework PX018, 18kW

PX018, 18kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Common Framework PX023, 23kW

PX023, 23kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Common Framework PX029, 29kW

PX029, 29kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Common Framework SA1-01001NB, Vertiv Geist SwitchAir

SA1-01001NB, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01001NB is a passive 1U airflow management device for switches with air intakes on both sides. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-01001SS, Vertiv Geist SwitchAir

SA1-01001SS, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01001SS is a passive 1U airflow management device for switches with air intake on one side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-01002, Vertiv Geist SwitchAir

SA1-01002, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002 is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-01002L, Vertiv Geist SwitchAir

SA1-01002L, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002L is a passive 1U airflow management device is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool […]
Common Framework SA1-01002S, Vertiv Geist SwitchAir

SA1-01002S, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002S is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-01002XLNB, Vertiv Geist SwitchAir

SA1-01002XLNB, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002XLNB is a passive 1U airflow management device is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool […]
Common Framework SA1-02003, Vertiv Geist SwitchAir

SA1-02003, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02003 is a passive 2U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-02003XS, Vertiv Geist SwitchAir

SA1-02003XS, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02003XS is a passive 2U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Common Framework SA1-02005, Vertiv Geist SwitchAir

SA1-02005, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02005 is a passive 2U airflow management device for rear rack mounted 2U switches with side air intake. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of […]
Common Framework SA1-03001, Vertiv Geist SwitchAir

SA1-03001, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-03001 is a passive 3U airflow management device for 3 rear rack mounted 1U switches with air intakes on both sides. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from […]
Common Framework SA1-09001, Vertiv Geist SwitchAir

SA1-09001, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-09001 is a passive 9U airflow management device for re-directing exhaust from the side of core switches.
Common Framework SA2-002, Vertiv Geist SwitchAir

SA2-002, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-002 is an active 2U airflow management device for 1U or 2U switches with air intake on both sides, or rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to […]
Common Framework SA2-003, Vertiv Geist SwitchAir

SA2-003, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-003 is an active 2U airflow management device for 1U or 2U switches with air intake on one side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake […]
Common Framework SA2-004, Vertiv Geist SwitchAir

SA2-004, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-004 is an active 2U airflow management device for 1U switches with air intake on front (port) side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake of […]
Common Framework SA2-006, Vertiv Geist SwitchAir

SA2-006, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-006 is an active 2U airflow management device for single side air intake core switches. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake of the switch. The […]
Common Framework SmartRow DCX

SmartRow DCX

SmartRow DCX provides a complete data center in a row in just weeks not months. It combines four to fourteen racks with data center grade thermal management, UPSs, power management, monitoring and control technologies and cable management all in an enclosed room neutral system. With multiple ways to configure for future expansion, power and cooling […]
Common Framework SmartRow™ DCR

SmartRow™ DCR

The SmartRow™ DCR is a self-contained, modular datacenter designed to simplify IT deployments in indoor spaces. With capacities up to 10 racks, integrating cooling, UPS, power distribution, fire suppression, and backup ventilation, the SmartRow enables standardization of complete micro datacenter configurations across multiple locations. The degree of factory integration maximizes installation speed while minimizing cost. […]

Thermal Remote Monitoring

Leveraging your thermal management systems to support business objectives such as improving energy efficiency and cutting costs takes superior system insight and control. Continuous monitoring of your critical thermal equipment gives you this insight. Real-time data allows you to quickly make system adjustments based on your load requirements. This agility optimizes cooling and overall data […]
Common Framework Vertiv BBD BD, UPCBD2

Vertiv BBD BD, UPCBD2

The Vertiv BDE BD Series UPCBD2 is a round-cornered, square-design telephone distribution enclosure. Included in the UPCBD2 are a dielectric shield, standoff bracket, and shield isolation bonding/grounding bracket assembly. The UPCBD2 houses terminations and splices of small pair-count buried cable. Specific applications include termination of all types of service wires and housing for all types […]

Vertiv Liebert CWA

Vertiv™ Liebert® CWA is designed to help cloud and large co-located data centers achieve their goals, such as reducing first cost and increasing speed-to-market. It also addresses business and technical considerations such as reduced floor space, ensuring optional temperature and operations, improving protection, increasing efficiency, and simplifying deployment.
Common Framework Vertiv XTE 201 Series

Vertiv XTE 201 Series

Compact power, equipment and battery enclosures designed for small cell sites at the network edge.
Common Framework Vertiv XTE 201, 120VAC-NiCd

Vertiv XTE 201, 120VAC-NiCd

​Separate side-loading power/equipment and NiCd battery enclosures are designed for small cell sites at the network edge.
Common Framework Vertiv XTE 201, 208/240VAC-NiCd

Vertiv XTE 201, 208/240VAC-NiCd

​Separate side-loading power/equipment and NiCd battery enclosures are designed for small cell sites at the network edge.
Common Framework Vertiv XTE 201, 208/240VAC-VRLA

Vertiv XTE 201, 208/240VAC-VRLA

​Separate side-loading power/equipment and VRLA battery enclosures are designed for small cell sites at the network edge.
Common Framework Vertiv XTE 401 Series

Vertiv XTE 401 Series

Designed to discretely house DC power equipment, electronics and batteries in a single robust enclosure. The Vertiv XTE 401 Series is a family of three small single-sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Common Framework Vertiv XTE 401, 2410

Vertiv XTE 401, 2410

The Vertiv XTE 401 Series is a family of three small single-sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Common Framework Vertiv XTE 401, 2416

Vertiv XTE 401, 2416

The Vertiv XTE 401 Series is a family of three small single sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Common Framework Vertiv XTE 401, 3816

Vertiv XTE 401, 3816

TheVertiv XTE 401 Series is a family of three small single sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Common Framework Vertiv XTE 601 Series

Vertiv XTE 601 Series

Vertiv XTE 601 Series of scalable outdoor enclosure solutions designed to ensure environmental stability for sophisticated electronic equipment and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 12 RU

Vertiv XTE 601, 12 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 17 RU

Vertiv XTE 601, 17 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 22 RU

Vertiv XTE 601, 22 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 27 RU

Vertiv XTE 601, 27 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 32 RU

Vertiv XTE 601, 32 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601, 8 RU

Vertiv XTE 601, 8 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Common Framework Vertiv XTE 601B Series

Vertiv XTE 601B Series

The Vertiv XTE 601B Series enclosures are available in a variety of heights and designed to accept NiCd and/or VRLA batteries, and can be cooled actively or by free air.
Common Framework Vertiv XTE 601B, 60″-72″ Enclosures

Vertiv XTE 601B, 60″-72″ Enclosures

The Vertiv XTE 601B enclosures are available in both 60″ and 72″ heights, and are designed to accept VRLA batteries.
Common Framework Vertiv XTE 601E Series

Vertiv XTE 601E Series

Designed to support C-RAN technology today while providing the flexibility to adapt to the 5G infrastructure needs of tomorrow. Streamline infrastructure at your site by consolidating electronics, power and batteries in a single enclosure.
Common Framework Vertiv XTE 601E, 84″ Enclosure

Vertiv XTE 601E, 84″ Enclosure

This thermally controlled enclosure combines DC power, network electronics and battery backup in a single compartment to meet your macro cell site or C-RAN deployment needs. Electronics and batteries are kept at proper operating temperature by either a door mounted heat exchanger (HX) or an air conditioner, with two Thermal Electric Coolers (TECs) managing battery […]
Common Framework Vertiv XTE 601P, 60″ Enclosure

Vertiv XTE 601P, 60″ Enclosure

The Vertiv XTE 601P, 60″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.
Common Framework Vertiv XTE 601P, 72″ Enclosure

Vertiv XTE 601P, 72″ Enclosure

The Vertiv XTE 601P, 72″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.

Vertiv XTE 601P, 72″ Enclosure

The Vertiv XTE 601P, 72″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.
Common Framework Vertiv XTE 802 Series

Vertiv XTE 802 Series

The Vertiv XTE 802 Series Network Edge Enclosure, constructed entirely of lightweight steel, ensures vital electronic equipment is protected from vandalism and environmental damage.
Common Framework Vertiv XTE ATS, Outdoor

Vertiv XTE ATS, Outdoor

The Vertiv XTE ATS outdoor Automatic Transfer Switch compliments Vertiv XTE integrated outdoor enclosures ideal for shelters and huts in the wireless industry, while the outdoor solution is designed to accompany an existing manual transfer switch or stand alone in any copper, fiber or wireless application.
Common Framework Vertiv XTE EBRE Series

Vertiv XTE EBRE Series

The Vertiv XTE EBRE Series enclosure is an extended battery reserve enclosure that provides a stable environment for battery backup of your wireless site in case of power grid failure.
Common Framework Vertiv XTE Platform Series

Vertiv XTE Platform Series

Designed to be installed in eight hours or less, the Vertiv™ XTE Platform Series is ideal for rapidly deploying cell sites. Prefabrication saves money, simplifies installation, and minimizes site disturbance.
Common Framework Vertiv XTE PTS Series

Vertiv XTE PTS Series

Vertiv XTE PTS Series provides main service disconnect, AC surge protection, AC distribution and generator connection in a single environmentally protected enclosure geared toward remote telecom installations.

Vertiv XTE PTS, Power Protection Cabinets

The Vertiv XTE PTS, Power Protection Cabinets with NTI Technology from Vertiv offers full-service power transfer pedestals for use with outdoor electronic equipment enclosures, especially for the wireless market (i.e. base stations, remote terminals).
Common Framework Vertiv XTE PTS, Power Transfer Switches

Vertiv XTE PTS, Power Transfer Switches

The Vertiv XTE PTS, Power Transfer Switches provides main service disconnect, AC surge protection, AC distribution and generator connection in a single environmentally protected enclosure geared toward remote telecom installations.
Common Framework Vertiv XTE Sole Enclosure

Vertiv XTE Sole Enclosure

The Vertiv XTE Sole Enclosure offers thermal management, battery backup and room for wireless carrier equipment to meet your small cell application needs.
Common Framework Vertiv XTE Stackable Series
Common Framework Vertiv™ Geist™ SwitchAir

Vertiv™ Geist™ SwitchAir

Network switches, load balancers and routers typically sit at the top and back portion of the rack, away from the cold aisle airflow at the front of the cabinet. This placement makes it difficult for cold air to flow from the front of the rack to the air intakes of the network switch equipment, increasing […]
Common Framework Vertiv™ VRC Rack Cooling System, 3500 Watts

Vertiv™ VRC Rack Cooling System, 3500 Watts

The Vertiv™ VRC rack-mounted IT cooling unit packs powerful, scalable cooling into a compact unit and has been designed to tackle some of the biggest challenges seen in edge environments. Its variable speed components provide up to 3.5 kW of scalable cooling capacity, while its compact footprint saves valuable IT floorspace for critical equipment. It […]
Common Framework Vertiv™ VRC-S Edge-Ready Micro Data Center System

Vertiv™ VRC-S Edge-Ready Micro Data Center System

Easily put IT infrastructure where you need it with the Vertiv™ VRC-S. This pre-integrated, enclosed micro data center is designed to be up and running at an edge application in days. Available in eight pre-built standard options with four rack sizes and two voltages (120V or 208V) to choose from, the solution incorporates a rack […]
Common Framework VRC Self Contained Version

VRC Self Contained Version

The Vertiv™ VRC Self-Contained rack-mounted IT cooling system packs powerful, scalable cooling into a compact unit and is designed for fast, easy installation in your edge computing spaces. Its variable speed components provide up to 3.5 kW of scalable cooling capacity, while its compact footprint saves valuable IT floorspace for critical equipment. It fits into […]
Common Framework VRC Split Version
Common Framework VRC Split Version

VRC Split Version

The Vertiv™ VRC Split rack-mounted IT cooling system packs powerful, scalable cooling into a compact unit and is designed for installation in small server rooms, network closets, and edge computing spaces. Its variable speed components provide up to 3.5 kW of scalable cooling capacity, while its compact footprint saves valuable IT floorspace. It fits into […]